PalmSens4
Compact, versatile and powerful
- (Bi)Potentiostat / Galvanostat / Impedance Analyzer
- FRA / EIS: 10 μHz up to 1 MHz
- 9 current ranges: 100 pA to 10 mA
- 18-bit resolution
- Bluetooth or USB connection
Description
Bu ürün Electrochemical Impedance Spectroscopy (EIS). The PalmSens4 has a large potential range (-5V to 5V or -10V to 10V) and current range (100 pA to 10 mA) with a high resolution and low noise. The economical PalmSens4 is a complete laboratory instrument but its compact and rugged design makes it also ideal for field work. Connecting via Bluetooth guarantees a perfectly floating measurement.
Configurable
PalmSens4 comes in different configurations:
- ±5 V or ±10 V potential range
- EIS/FRA with maximum frequency of 100 kHz or 1 MHz
- optional BiPotentiostat module for second WE
- optional iR-Compensation
Standard included
- Rugged carrying case
- High quality, double shielded cell cable with 2 mm banana connectors for Working, Counter, Reference electrode and Ground
- Crocodile clips
- Dummy cell
- USB cable
- Manual and Quick Start document
- PSTrace software for Windows
Always a backup
Every PalmSens4 is equipped with an internal storage of 8 GB. This means all your measurements can automatically be saved on-board as backup.
Measurements can be browsed and transferred to the PC easily using the PSTrace software for Windows.
Voltammetric techniques
- Linear Sweep Voltammetry (LSV)
- Cyclic Voltammetry (CV)
- Fast Cyclic Voltammetry (FCV)
- AC Voltammetry (ACV)
Pulsed techniques
- Differential Pulse Voltammetry (DPV)
- Square Wave Voltammetry (SWV)
- Normal Pulse Voltammetry (NPV)
Stripping modes
The voltametric and pulsed techniques can all be used in their stripping modes which are applied for (ultra-) trace analysis.
Galvanostatic techniques
- Linear Sweep Potentiometry (LSP)
- Chronopotentiometry (CP)
- MultiStep Potentiometry (MP)
- Open Circuit Potentiometry (OCP)
- Stripping Chronopotentiometry (SCP or PSA)
Amperometric techniques
- Chronoamperometry (CA)
- Zero Resistance Amperometry (ZRA)
- Chronocoulometry (CC)
- MultiStep Amperometry (MA)
- Fast Amperometry (FAM)
- Pulsed Amperometric Detection (PAD)
- Multiple-Pulse Amperometric Detection (MPAD)
Other
- Mixed Mode (MM)
Potentiostatic/Galvanostatic Impedance spectroscopy (EIS/GEIS)
- Potential scan (IMPE) or current scan
- Fixed potential or fixed current
- Time scan (IMPT)
| PalmSens4 PS4.F0.05 | PalmSens4 PS4.F0.10 | PalmSens4 PS4.F1.05 | PalmSens4 PS4.F1.10 | PalmSens4 PS4.F2.05 | PalmSens4 PS4.F2.10 | |||
|---|---|---|---|---|---|---|---|---|
| General | ||||||||
| dc-potential range | ±5 V | ±10 V | ±5 V | ±10 V | ±5 V | ±10 V | ||
| compliance voltage | ±10 V | ±10 V | ±10 V | ±10 V | ±10 V | ±10 V | ||
| maximum current | ±30 mA | ±30 mA | ±30 mA | ±30 mA | ±30 mA | ±30 mA | ||
| Potentiostat | ||||||||
| applied dc-potential resolution | 76.3 µV (18-bit) | 76.3 µV (18-bit) | 76.3 µV (18-bit) | 76.3 µV (18-bit) | 76.3 µV (18-bit) | 76.3 µV (18-bit) | ||
| applied potential accuracy | ≤0.1% ±1 mV offset | ≤0.1% ±1 mV offset | ≤0.1% ±1 mV offset | ≤0.1% ±1 mV offset | ≤0.1% ±1 mV offset | ≤0.1% ±1 mV offset | ||
| current ranges | 100 pA to 10 mA (9 ranges) | 100 pA to 10 mA (9 ranges) | 100 pA to 10 mA (9 ranges) | 100 pA to 10 mA (9 ranges) | 100 pA to 10 mA (9 ranges) | 100 pA to 10 mA (9 ranges) | ||
| Galvanostat | ||||||||
| current ranges | 1 nA to 10 mA (8 ranges) | 1 nA to 10 mA (8 ranges) | 1 nA to 10 mA (8 ranges) | 1 nA to 10 mA (8 ranges) | 1 nA to 10 mA (8 ranges) | 1 nA to 10 mA (8 ranges) | ||
| applied dc-current | ±6 times applied current range | ±6 times applied current range | ±6 times applied current range | ±6 times applied current range | ±6 times applied current range | ±6 times applied current range | ||
| FRA / EIS (impedance measurements) | ||||||||
| frequency range | 10 μHz to 100 kHz | 10 μHz to 100 kHz | 10 μHz to 1 MHz | 10 μHz to 1 MHz | ||||
| Other | ||||||||
| housing | aluminium with rubber sleeve: 15.7 x 9.7 x 3.5 cm3 | aluminium with rubber sleeve: 15.7 x 9.7 x 3.5 cm3 | aluminium with rubber sleeve: 15.7 x 9.7 x 3.5 cm3 | aluminium with rubber sleeve: 15.7 x 9.7 x 3.5 cm3 | aluminium with rubber sleeve: 15.7 x 9.7 x 3.5 cm3 | aluminium with rubber sleeve: 15.7 x 9.7 x 3.5 cm3 | ||
| weight | 500 g | 500 g | 500 g | 500 g | 500 g | 500 g | ||
| temperature range | 0 ºC to + 50 ºC | 0 ºC to + 50 ºC | 0 ºC to + 50 ºC | 0 ºC to + 50 ºC | 0 ºC to + 50 ºC | 0 ºC to + 50 ºC | ||
| power supply | USB or internal LiPo battery | USB or internal LiPo battery | USB or internal LiPo battery | USB or internal LiPo battery | USB or internal LiPo battery | USB or internal LiPo battery | ||
| communication | USB and Bluetooth (Dual Mode) | USB and Bluetooth (Dual Mode) | USB and Bluetooth (Dual Mode) | USB and Bluetooth (Dual Mode) | USB and Bluetooth (Dual Mode) | USB and Bluetooth (Dual Mode) |
PSTrace
PSTrace for Windows provides support for all techniques and device functionalities. With a smooth simple interface, showing only the applicable controls, PSTrace is suitable for all levels of user experience. Functions include:
- Direct validation of method parameters
- Equivalent Circuit Fitting
- Automated peak search
- Scripting for running an automated sequence of measurements
- Open data in Origin and Excel with one click of a button
- Browse measurements on PalmSens4’s internal storage
PStouch
PStouch works with all our single channel and multiplexed instruments. PStouch functions include:
- Setting up and running measurements
- Analysing and manipulating peaks
- Sharing data directly via e-mail, Dropbox, or any other file sharing service
- All files compatible with PSTrace
